Skip to main content

Globe's HOOQ.TV an (unethical) scam!!



After being terribly disappointed with the subscription stage and after also after a very disappointing test drive (at least Netflix tries to be do-no-evil), I am now very disappointed with the un-subscription of HOOQ.tv with Globe.


Globe sends me a message:


Hi! We'd like to remind you that your free HOOQ will end in 7 days on 10/27/2015. Upon expiry, your subscription will auto-renew to the paid version for P149 per month. If you don't want the paid version, text HOOQ STOP to 8888. before the expiry date. Thank you!


I send the HOOQ STOP to 888 and received:


Sorry, you have entered an invalid keyword. Please make sure your keyword is correct with no extra characters and spaces. For more info on promos, dial *143#, FREE from your Globe/TM mobile phone.


I called Globe Support (211).


Here's the scam:


- GoSurf 999 comes with the HOOQ Free Plan


- After the Free HOOQ Plan (which you did not use because it sucks) expires, it will auto-renew without your consent (!!! UNETHICAL !!!)


- The support agents cannot unsubscribe the HOOQ Free Plan because it needs to be on the Paid HOOQ plan before they can unsubscribe. This means after your billing cycle, you will be charged the first month of the Paid HOOQ plan before they can unsubscribe


- Globe (maybe in cahoots with HOOQ for scam revenue) will make you call again to make the bill adjustment!


Let's stand up to companies who are unethical and do evil! May they lose revenue and go to where the evil is!

Comments

Carlos said…
Wow really? I think I'm now in the same boat. Had i known about this, i wouldn't have even signed up for the free trial. So there's no way to stop subscription until you've made your first payment??

Popular posts from this blog

Resetting admin password in IBM System p5 510 Express ASMI

These are the steps in resetting the admin password: 0. Re-route stored static in your body via an ESD wrist strap to a metallic element. 1. Look for the 2 toggle switches and service processor batt. The batt should be in front of the Power Supply 1 and Power Supply 2 (codes: E1 and E2, see Rear Location Codes on the cover plate). The "very tiny" toggle switches should be in the area of P1-C14 slot. I forgot the exact sequence but it should be a combination of the ff. step (2): 2. Remove the battery, toggle the switches to the opposite direction. Allows some time for the caps to discharge. 3. Move back the toggle switches and put back the batt in its place. 4. Assign your PC to Class C subnet (i.e. masked 255.255.255.0 ): IPaddr: 192.168.2.x for HMC1 or IPaddr: 192.168.3.x for HMC2 5. Ping HMC1 or HMC2. Access the web interface using the default address: http://192.168.2.147 (for HMC1) or http://192.168.3.147 (for HMC2) Note: Sometimes you have to force the https protocol:

Zenoss: monitor free VMWare ESXi version

We confirmed that the free ESXi version does not allow SNMP gets, only traps. The original script was taken from here: http://communities.vmware.com/docs/DOC-7170 Modified script: http://mirakulo.com/pub/esxi/check_esx_wbmem.py We added Fan and power supply, hinted from this page: http://www.stephenjc.com/2009/01/whatsup-vmware-esxi-monitor-these.html Use this guide to add the Data source: http://www.zenoss.com/community/docs/howtos/create-modify-nagios-templates Added as template under: /Devices /Server /VMWare /ESXi /Templates /esxi-monitor /check_esx_wbmem Name: check_esx_wbmem Source Type: Command Enable true Use SSH false Component: blank Event class: /VMWare/ESXi Severity: Error Cycle time: 60 Parser: auto Command template: /usr/local/zenoss/python/bin/python /opt/zenoss/libexec/check_esx_wbmem.py https://${dev/manageIp}:5989 root passwd To bind this template to ESXi nodes, go to the device: Example: /Devices /Server /VMWare /ESXi /esxi-01.prod.corp.org then to its temp

ld: unrecognized option '--hash-style=both'

gcc -Wl,-Map=contiki.map,-export-dynamic testv6.co obj_linux-native/socketdev_listener.o \ contiki-linux-native.a -o testv6.linux-native /usr/local/bin/ld: unrecognized option '--hash-style=both' /usr/local/bin/ld: use the --help option for usage information collect2: ld returned 1 exit status If you look closely, the error is something related to the local gcc not using the host's linker (ld). $ which gcc /usr/bin/gcc $ which ld /usr/local/bin/ld For some reason, I messed my compiler path. To synchronized gcc to use the host's dynamic linker (i.e. /usr/bin/ld ), set the environment variable COMPILER_PATH to /usr/bin . $ export COMPILER_PATH=/usr/bin $ echo $COMPILER_PATH /usr/bin $ gcc -print-prog-name=ld /usr/bin/ld